Quickstart Guide

These step-by-step tutorials and quick-reference guides help make setting up EndoSnake as easy as possible.

If your network is F140, then your

Wifi Box password: 12345678

Note: Increase the resolution in your app settings for the best results like shown.

XH-WIFIBOX-xxx

Mobile search has two versions of WiFi signals If it is XJ-WIFIBOX-xxx, you need to enter the password “88888888”. If it's WIFlimage_xxx, click on the connection directly

If your network is F140, then below are the steps

Choose your Device / Operative System here:

Using Endosnake on Windows

Using Windows 10 Camera App:

Credits to: @c_w_phil
  • Launch the camera App
  • Plug in any Endosnake into your computer USB port. The LED lights at the tip of the camera head should light up.
  • On the top right of the app you should be able to change to the EndoSnake camera.

In the settings, top left to change resolution and frame per second rate of the device.

Using Bandicam:

  • Launch Bandicam.
  • Plug in any Endosnake into your computer USB port. The LED lights at the tip of the camera head should light up.
  • Press the HDMI button in the Bandicam interface, and a new window will pop up, with the camera footage rolling.

In the camera window, pressing the Settings icon will allow to change resolution and frame per second rate of the device.

Using ViewPlay:



Some users report Quicktime not working on the latest OS update, please consider using OBS Project instead if you're affected:

Using Endosnake on Mac OS

Photobooth

OBS Project


Downloads for Mac OS:

Using Endosnake on Android

Note: S8/S9 and above devices will require the Wifi Adapter (not included - $24.99) to be able to connect with the Endosnake™️. You can find it Here



Note: Following apps are for the use with the Wifi Box.


Downloads for Android:

Using Endosnake on iOS

Note: Apple Devices will require the Wifi Adapter (not included - $24.99) to be able to connect with the Endosnake™️. You can find it Here



Downloads for iOS:

How to Setup the Wireless Box

Step 1: Install the Right App

If you purchased a Wifi box, you need to download the App. You can scan the QR code here and download it through the browser.

Please choose the app that matches your phone. For example, if you own an iPhone, select the iOS app.

Alternatively, in the iOS store or Google Play, search for the app “Wifiimage”.

Step 2: Connect & Turn On the Wireless Box

Insert the lens' cable to the Wifi Box.

Hold down the button briefly to turn it on. Note: a quick press of the button takes a photo.

Step 3: Wifi Connection

Open up the wireless connection setting on your phone. Search for Wifi hotspot signals. You’ll get one of three names.

If you see ! (exclamation mark) after the wifi signal like this:

It means the phone can’t see an internet signal. This won’t affect the use of Endosnake.

If you see F140, connect and enter the password 12345678

If you see XJ-WIFIBOX-xxx, connect and enter the password 88888888

If you see WIFIImage_xxx, connect (there’s no password)

Once connected, the EndoSnake App will show what the camera sees.

Be sure to increase the resolution for clearer visuals. If the visual has any odd delays, please adjust the channels in the software settings and/or lower the resolution.


Common Problems

  1. Some mobile phones have exclamation marks after WiFi connection, which means that the mobile phone can not identify the signal on the Internet, does not affect the use of mobile phones. If a few mobile phones can not be used, automatic identification can be turned off in the WLAN+
  2. If there is a black screen, please check whether the mobile phone is allowed to open when the software is installed, and check whether the lens is normal.
  3. If picture delay occurs, channel can be adjusted in software settings, or output resolution can be adjusted appropriately.
  4. It's better not to use the product while punching. If you don't need it for a long time, please keep it as full of electricity as possible.
  5. Updated version of mobile phone system may lead to black screen screen, and software can be downloaded and used again. If not solved, feedback information can be given to store "mobile phone model + system version". We will update the software in time.
  6. 10S mobile phone users can search "Wifiimage" and Android phone users can search in Google Play to.